The Importance of Coating in the Industry

Industrial products are prone to many kinds of destructive conditions that can cause heavy losses to the producer. From buildings to small machinery, everything can get ruined if natural decay catches up with them and it is something that happens all the time. In order to prevent that from happening, manufacturers apply a coating of industrial grade paint on their products. This coating can be of a varying thickness, which is measurable with a coating thickness tester.

The coating on any substrate, such as steel and concrete, serves many purposes. The 3 most important ones have been listed below.

1. Protection from Wear: The coating protects industrial components from wear due to artificial or natural causes. The industrial environment that many machines remain in is not helpful in keeping them lasting for long. Not just the equipment but the floor on which heavy ones are kept, that too needs the protection of good quality industrial coating. Coating helps in retaining the hardness, shine, and the quality of the product for a long time.

2. Providing Safety: Coating also keeps a surface safe for treading and working on. Factories, where the work involves lots of movement, need a non-slippery floor to prevent accidents. Machines require a non-sticky coating inside them so that they can operate smoothly. However, the coating should not be too thick or thin. A coating thickness analyser helps one to measure the right thickness.

3. Prevention of Corrosion: Natural factors like rust and external factors like dirt and debris can corrode the machinery that does not have a protective coating. Without the help of preventive measures, even the toughest materials can decay over time. Even the products that pass through the machines could cause corrosion in them. Therefore, the inner and outer surfaces of every machine require proper coating.

A high-quality coating saves repair costs in the long term and helps manufacturers to maximize their profits. There are many measuring instruments that they can use to arrange the correct protection for their machines and products. A plating thickness tester is one of the most important devices that every producer should have the knowledge to use.

Protection from Electric Shocks with Hipot Test Equipment

Electrical devices are prone to a minimal amount of current leak due to the voltage and internal capacitance present in it. The insulator acts as a barrier and does not let current leak more than what is safe. However, the insulator could get damaged due to excessive heat, faulty design or other factors, which could cause an excessive current leak. This is dangerous enough to shock a person to death. Technicians, therefore, use Hipot test equipment to check the insulation regularly so that even a small leak can get detected before it harms someone.

What is a Hipot Test?

Hipot, which is an abbreviation for high potential, is a test that should get conducted on every machine that involves human control for operating it. This test is also called the Dielectric Withstanding Voltage, and it makes sure that the insulation of a machine or its component is sufficient to protect the operating technician from an electrical shock. The test involves a high voltage flow that is applied between a product’s active current conductors and its metallic shield. As a result, a current flow occurs through the insulation, which is the leakage current, and this is what the hipot tester India measures.

Benefits of Testing Devices before Use

This test is based on the theory that if the insulation does not breakdown after a higher than normal voltage is applied to it, the electronic device is safe to operate on. That is why it has also gained the name Dielectric Withstanding Voltage test. Not only can the Hipot test kit detect the condition of the insulation but it also lays bare the defects in the product. Faulty workmanship and poor material quality in the appliance, especially in the small gaps between the conductors loaded with current and the ground. Dust accumulation, humidity, vibration, and other contaminants can close these gaps down and cause fatal accidents.

Every factory should conduct regular checks on its machinery by getting modern equipment from a Hipot tester manufacturer in India. Testing electronic products that are for sale is also important before they leave the production site. A hipot test keeps all users safe from harm.

How Can a Thermal Test Chamber Help Producers in Manufacturing High-Quality Products?

A manufacturing process that produces durable products is what every manufacturer wants. Industrial geniuses have devised many machines that help in the production of long-lasting and high-quality products that can withstand the effects of nature. Even after producing it, the need remains to check if they can really perform under environmental pressure like the producers hoped. A thermal test chamber is designed to do just that. It simulates the environmental effects on the products and is also called as an environmental chamber.

How does it Work?

A thermal test chamber replicates the environment that a machinery, material, component, or device would go through over a long period of time. It artificially speeds up the effects of natural conditions to help producers check the durability and resistant abilities of their products. In the industry, there are specifically three purposes for putting a product to the test in an environmental chamber. Firstly, it could be just a stand-alone test of environmental effects on the product specimen. Secondly, it could be to devise further physical and chemical tests on the specimen and lastly, to create an environmental condition for conducting these tests.

Simulating Environmental Conditions

The different environmental effects that these chambers can simulate depend on the purpose of their design and the technology that they use. They can replicate the effects of extreme temperature, sudden temperature changes, altitude, humid conditions, electromagnetic vibrations, radiation, corrosion, rain, weathering effects, UV degradation, and vacuum. The manufactured specimens are put into the chamber and they go through one or more tests to determine their success.

Selecting Good Thermal Chamber Manufacturers

The design of these units depends on the expertise of the thermal chamber manufacturers and the standards that they meet. Some units are as big as a room while others are small and can fit into a universal test chamber. There are variations in the kinds of tests that thermal test chambers can perform. A producer can get a unit that has a set condition for a single type of test if he produces a single type of product. For more tests, one can get a unit that has different conditions programmed into it.