Diagnose Electric Motor Damages with These Simple Steps

Electric motors are the core of every light and heavy machine that keeps the production process going on. With so many motors that run simultaneously, it is essential that each one of them run at full capacity. When an electric motor gets damaged, it can cause failure in the whole machinery and even the ones connected to it. Therefore, factories ensure that regular checks get carried out to maintain the integrity of the motors. There is multiple electric motor testing equipment like the torque dynamometer, torque tester for stepper motors, ultra high-speed motors, and more.

It is good to be in touch with electric motor testing equipment suppliers. However, many times when the motor fails, there are simple checks that can ease the repair procedure. An Ohmmeter is a helpful instrument for these maintenance checks. Before beginning the motor test, remember to disconnect it from all power supplies. At no time during the checking process does the motor require electricity. Additionally, opening it up while power is still on can prove fatal to one’s life. After conducting these preliminary checks, it is time to diagnose the damage.

1.Outer Shell of the Motor: There are signs on the outer frame of the motor that can indicate the underlying problems. If not fixed, these shorten the life of the motor. Check for damaged mounting holes or feet, darkened paint, dirt and other forms of debris in the motor windings. Overloading, wrong application, and excessive heating can result in these problems.

2.Failures in the Bearing: Multiple problems result from the faults in the bearings of the electric motor. These bearings allow the rotor assembly to rotate smoothly inside the frame. They are located at both the ends of the motor. Check the condition of the bearings by spinning the rotor with one hand, while putting the other hand on top of the motor. Watch closely, try to feel and hear obstructions, if any. Pull out and push the shaft to see how much movement occurs. The least the better!

3.The Windings: Short circuits in the windings often cause the electric motors to fail. You would need an Ohmmeter now to check the resistance value. Choose the highest scale in the meter. The value of the ohmmeter should be in millions or at least in the larger six-figure digits. Make sure your hands do not touch the metal probe tips as that would result in inaccurate data.

4.The Capacitor: Sometimes the motor does not start because of a damaged capacitor. A metal cover protects the capacitor. Look for signs of oil leakage, bulging container, holes, smoke residue, or burning smell. You can use the ohmmeter again to check if the meter’s battery discharges the capacitor. If it does not, you could have to replace it.

Many A-grade companies offer several testing instruments so that industrial machinery can run at their full potential. You can get in business with such companies who, among other services, are environmental test chamber manufacturers in India. This would help your firm in continuing its operations without hiccups.

The Modern History of Stroboscopes and Popular Uses of the Stroboscopic Principle

The year was 1832 when Joseph Plateau used a disc with radial slits, which he turned to view images on another rotating wheel. He called it the “Phenakistoscope” and you can tell he was quite proud of what he did. Around the same time, Simon Ritter from Austria invented a similar device, which he called the “Stroboscope.” This was an independent invention and the name stuck. Stroboscopes are still in use today. This device has done its bit in changing the face of the world and making many jobs easier. The internet offers great deals on plating thickness tester, thermal test chamber, coating thickness tester, coating thickness analyzer, stroboscope prices in India for companies and individuals.

Origin and Function

Stroboscope has its origin in the Greek words “strobos” and “skopein” which together form the meaning “to look at a whirlpool.” That defines this instrument exactly as it is. A stroboscope employs a rotating disk with slits or holes to view an object moving cyclically in any way the viewer wants. Another way to do this is by flashing light at consistent intervals to view the rotating object. Take the example of a fan. When it rotates, its blades seem invisible. However, if you flash a light at quick intervals at it, you can see the blades moving slowly or completely stationary.

Primary Applications

A stroboscopic principle is used to study rotation, reciprocation, oscillation or vibration of objects. One of the first applications of this principle was in the production of moving pictures. There were many toys in the early days of this invention that used the stroboscopic effect. These led to the usage of vibrating mirrors that were known as Mirror Galvanometers. Etienne Oehmichen patented the electric stroboscope in 1917, which was the first of its kind. He also built a camera at the same time, which was capable of shooting 1,000 frames per second.

The stroboscope soon found its way into the industries when Harold Eugene Edgerton invented the electronic stroboscope. This became the most popular invention and made it convenient to study machine parts while they ran. Stroboscopes are very important in the commercial production industries to scrutinize machines in motion. Its technology has advanced a lot since those early times of stroboscope’s invention. It is also used to measure cyclic speed and also as timing light to set the ignition time of internal combustion engines.

Other Purposes

Stroboscopes play an important role in the field of medicine as well. Doctors view and diagnose problems of the vocal chord with it. The patient has to hum or speak into a microphone, which turns on the stroboscope light at the same or a slightly different frequency. Another popular use of stroboscopes is in clubs and discotheques. Flashing light strobes emit the lighting effect that makes it look as if the crowd is dancing in slow motion. This adds to the atmosphere of the party and there is rarely a nightclub that does not use it.

However, the chief and most useful purpose of stroboscopes remain in the industries. It makes it much simpler to identify damage in machinery while it moves. This allows for accurate repair. Searching online can yield a good stroboscope supplier in India for in

What You Should Know about Current Sensors and the Way they Work

The voltage in an equipment or appliance is measurable without intruding its operations but to measure its current requires intrusion. That is why voltage sensing is a passive activity, which one can perform without interfering with the workings of the system and its performance. A current sensor, on the other hand, has to be inserted into the system and that could influence its performance. However, current sensing is an important part of protecting and controlling the circuit in every electronic device. It is also helpful for monitoring and enhancing their performance.

A current sensor measures the AC and DC current levels and provides an output that corresponds to the information it gets. There are different technologies that this device is available in and one has to check what specifications one needs. Some sensors can only measure AC or DC current levels and the modern ones can do both. Another important feature that one should check is if the sensor needs to be in line with the circuit or has to be clamped around the wire to measure.

Applications of a Current Transducer

Measuring the current that is being delivered to the load is helpful for a variety of applications. This device has many uses in a wide range of electronic systems, such as 4-20 mA systems, battery life indicators, current and voltage regulators, DC/DC converters, programmable current sources, ground fault detectors, communications devices, linear and switch-mode power supplies, motor speed controls, automotive power electronics, and more. It detects the current that flows through it and converts it into an easily measurable voltage output accordingly.

How a Current Sensor Works

The current flows through a wire or in a circuit causing a voltage drop. A magnetic field is also generated around the conductor that carries the current. A current transducer or sensor makes use of both of these phenomena. That is why current sensing is of two types, direct and indirect. While Ohm’s law explains direct sensing, indirect sensing is based on the laws of Ampere and Faraday. Direct sensing refers to the measurement of the voltage drop that occurs in the passive electrical components and indirect sensing means the measurement of the magnetic field surrounding the conductor.

Types of Current Sensors

There are basically three different types of current sensors: Hall Effect sensors, inductive sensors, and magneto resistive sensors.

* Hall effect sensors are the most commonly used current sensors in many industries as it can measure all types of current signals, that is, AC, DC, and pulsating current. It is based on the Hall Effect phenomenon that Edwin Hall discovered in 1879. It has a core, a Hall Effect device, and signal conditioning circuitry.

* Inductive sensors have a coil through which the wire active with current passes. It is used to measure AC currents.

* Magneto resistive sensors depend on the magnetic flux that changes the value of resistance of the current that flows through the plate. The magnetic flux deflects the path of the current and that increases its resistance as it flows for a long distance on the plate.

Getting the correct voltage sensor is important as it has a long-term application and every technology that it uses has a different purpose. Every electronic product can perform better if one pays attention to is current measurements.

The Importance of Coating in the Industry

Industrial products are prone to many kinds of destructive conditions that can cause heavy losses to the producer. From buildings to small machinery, everything can get ruined if natural decay catches up with them and it is something that happens all the time. In order to prevent that from happening, manufacturers apply a coating of industrial grade paint on their products. This coating can be of a varying thickness, which is measurable with a coating thickness tester.

The coating on any substrate, such as steel and concrete, serves many purposes. The 3 most important ones have been listed below.

1. Protection from Wear: The coating protects industrial components from wear due to artificial or natural causes. The industrial environment that many machines remain in is not helpful in keeping them lasting for long. Not just the equipment but the floor on which heavy ones are kept, that too needs the protection of good quality industrial coating. Coating helps in retaining the hardness, shine, and the quality of the product for a long time.

2. Providing Safety: Coating also keeps a surface safe for treading and working on. Factories, where the work involves lots of movement, need a non-slippery floor to prevent accidents. Machines require a non-sticky coating inside them so that they can operate smoothly. However, the coating should not be too thick or thin. A coating thickness analyser helps one to measure the right thickness.

3. Prevention of Corrosion: Natural factors like rust and external factors like dirt and debris can corrode the machinery that does not have a protective coating. Without the help of preventive measures, even the toughest materials can decay over time. Even the products that pass through the machines could cause corrosion in them. Therefore, the inner and outer surfaces of every machine require proper coating.

A high-quality coating saves repair costs in the long term and helps manufacturers to maximize their profits. There are many measuring instruments that they can use to arrange the correct protection for their machines and products. A plating thickness tester is one of the most important devices that every producer should have the knowledge to use.

Protection from Electric Shocks with Hipot Test Equipment

Electrical devices are prone to a minimal amount of current leak due to the voltage and internal capacitance present in it. The insulator acts as a barrier and does not let current leak more than what is safe. However, the insulator could get damaged due to excessive heat, faulty design or other factors, which could cause an excessive current leak. This is dangerous enough to shock a person to death. Technicians, therefore, use Hipot test equipment to check the insulation regularly so that even a small leak can get detected before it harms someone.

What is a Hipot Test?

Hipot, which is an abbreviation for high potential, is a test that should get conducted on every machine that involves human control for operating it. This test is also called the Dielectric Withstanding Voltage, and it makes sure that the insulation of a machine or its component is sufficient to protect the operating technician from an electrical shock. The test involves a high voltage flow that is applied between a product’s active current conductors and its metallic shield. As a result, a current flow occurs through the insulation, which is the leakage current, and this is what the hipot tester India measures.

Benefits of Testing Devices before Use

This test is based on the theory that if the insulation does not breakdown after a higher than normal voltage is applied to it, the electronic device is safe to operate on. That is why it has also gained the name Dielectric Withstanding Voltage test. Not only can the Hipot test kit detect the condition of the insulation but it also lays bare the defects in the product. Faulty workmanship and poor material quality in the appliance, especially in the small gaps between the conductors loaded with current and the ground. Dust accumulation, humidity, vibration, and other contaminants can close these gaps down and cause fatal accidents.

Every factory should conduct regular checks on its machinery by getting modern equipment from a Hipot tester manufacturer in India. Testing electronic products that are for sale is also important before they leave the production site. A hipot test keeps all users safe from harm.

How Can a Thermal Test Chamber Help Producers in Manufacturing High-Quality Products?

A manufacturing process that produces durable products is what every manufacturer wants. Industrial geniuses have devised many machines that help in the production of long-lasting and high-quality products that can withstand the effects of nature. Even after producing it, the need remains to check if they can really perform under environmental pressure like the producers hoped. A thermal test chamber is designed to do just that. It simulates the environmental effects on the products and is also called as an environmental chamber.

How does it Work?

A thermal test chamber replicates the environment that a machinery, material, component, or device would go through over a long period of time. It artificially speeds up the effects of natural conditions to help producers check the durability and resistant abilities of their products. In the industry, there are specifically three purposes for putting a product to the test in an environmental chamber. Firstly, it could be just a stand-alone test of environmental effects on the product specimen. Secondly, it could be to devise further physical and chemical tests on the specimen and lastly, to create an environmental condition for conducting these tests.

Simulating Environmental Conditions

The different environmental effects that these chambers can simulate depend on the purpose of their design and the technology that they use. They can replicate the effects of extreme temperature, sudden temperature changes, altitude, humid conditions, electromagnetic vibrations, radiation, corrosion, rain, weathering effects, UV degradation, and vacuum. The manufactured specimens are put into the chamber and they go through one or more tests to determine their success.

Selecting Good Thermal Chamber Manufacturers

The design of these units depends on the expertise of the thermal chamber manufacturers and the standards that they meet. Some units are as big as a room while others are small and can fit into a universal test chamber. There are variations in the kinds of tests that thermal test chambers can perform. A producer can get a unit that has a set condition for a single type of test if he produces a single type of product. For more tests, one can get a unit that has different conditions programmed into it.